International Journal of Advanced Materials Research
Articles Information
International Journal of Advanced Materials Research, Vol.5, No.1, Mar. 2019, Pub. Date: Mar. 5, 2019
Comparative Assessment of Resilient Characteristics of Warm and Hot Mix Asphalt Concrete
Pages: 1-11 Views: 101 Downloads: 56
Authors
[01] Saad Issa Sarsam, Department of Civil Engineering, College of Engineering, University of Baghdad, Baghdad, Iraq.
[02] Zainalabiden Nihad, Department of Civil Engineering, College of Engineering, University of Baghdad, Baghdad, Iraq.
Abstract
The resilient characteristics is a measure to the flexibility of asphalt concrete. Asphalt concrete mixtures were prepared using the hot mix HMA and the warm mix WMA techniques. Specimens of 102 mm diameter and 63.5 mm height for hot mix were mixed and compacted using Marshal method at 150°C, while the two type of warm mixtures were mixed and compacted at 110°C using medium curing cutback and cationic emulsion. Specimens were subjected to repeated indirect tensile stresses ITS, and repeated double punch shear stress. Another group of specimens were subjected to moisture damage. A third group of specimens of 102 mm in diameter and 102 mm in height were tested under repeated compressive stress. Beam specimens 380 mm in length, 80 mm width and 50 mm height were prepared under static compaction to the same target density. The deformation (total, permanent and resilient) were monitored and the resilient modulus Mr under each testing technique was calculated. Higher Mr could be observed for HMA mixture under tensile and shear stresses when compared to the WMA mixtures, while the WMA shows higher Mr values than HMA under compressive and flexural stresses.
Keywords
Warm Mix, Asphalt Concrete, Resilient, Modulus, Repeated Load, Deformation
References
[01] Sarsam S. I. (2016) “Comparative Assessment of Tensile and Shear Behavior of Warm and Hot Mix Asphalt Concrete”, Scientific Research Gate, International Journal of Engineering papers; 1 (2): pp 1–8.
[02] Panda M., Padhi M, Giri J. (2017) “Use of emulsion for warm mix asphalt”, International Journal of Transportation Science and Technology 6 pp 78–85. www.elsevier.com/locate/ijtst. (accessed 01. 08. 2018.).
[03] Vaitkus A., Cgas D., Laurinavicius A., Vorobjovas V., Perveneckas Z. (2016) “Influence of warm mix asphalt technology on asphalt physical and mechanical properties”, Construction and Building Materials 112, pp 800–806. www.elsevier.com/locate/conbuildmat. (accessed 2. 12. 2018.).
[04] Jalali V., (2016) “Performance of warm mix asphalt compacted at reduced temperature”, PhD thesis, University of Nottingham. England, http://eprints.nottingham.ac.uk/33488/1/Venon%20JALALI-4176639-PhD%20Thesis-Corrections-24.05.16-Final.pdf. (accessed 3.12. 2018.).
[05] Wu S., Wen H., Zhang W., Shen S., Mohammad L., Faheem A. & Muhunthan B., (2016) “Field performance of top down fatigue cracking for warm mix asphalt pavements”, International Journal of Pavement Engineering, DOI: 10.1080/10298436.2016.1248204. http://dx.doi.org/10.1080/10298436.2016.1248204. (accessed 8. 11. 2018.).
[06] Prowell B., Hurley G., Crews E., (2013) “Field Performance of Warm Mix Asphalt at the NCAT Test Track”. Available at: http://www.pavetrack.com/documents/Pdf/E9-E10-2005.pdf (accessed 01.08.16.).
[07] Hasan Z., Hamid B., Amir I., Danial N., (2013) “Long term performance of warm mix asphalt versus hot mix asphalt”, J. Cent. South Univ. 20: 256−266. DOI: 10.1007/s11771-013-1483-1.
[08] Sarsam S. I., (2018) “Behavior of Warm Mix Asphalt Concrete under Moisture Damage”, International Journal of Engineering Papers, vol. 3 (1), 3 February, pp. 21–28.
[09] Nihad Z., Sarsam S., (2018) “Deformation and Resilient Behavior of Hot and Warm Mix Asphalt Concrete”, Civil Engineering Journal, Vol. 4, No. 10, October. pp 2398-2410. DOI: 10.28991/cej-03091168.
[10] Sarsam S. I., Zainalabiden N. (2018) “Flexural Behavior of Warm Mix Asphalt Concrete”, Trends in Transport Engineering and Applications, Vol. 5, Issue 2, pp 10-20.
[11] López C. (2017) “Study of warm mix asphalt with super stabilized emulsion”, Revista Ingeniería de Construcción. RIC.; 32 (1): pp 57–64. DOI: 10.4067/s0718-50732017000100006.
[12] Raghavendra A., Medeiros M., Hassan M., Mohammad L. and King W., (2016) “Laboratory and Construction Evaluation of Warm-Mix Asphalt.” Journal of Materials in Civil Engineering, American Society of Civil Engineers, vol. 28 (7), July, pp 0899-1561, DOI: 10.1061/(ASCE) MT. 1943-5533.0001506.
[13] Miller I., and Bahia H, (2009) “Sustainable asphalt pavements: technology, knowledge gaps, and opportunities” Modified Asphalt Research Centre, University of Wisconsin, Madison.
[14] Izadi A., and Mirzaiyan D. (2016) “SCB Samples Fracture Resistance Evaluation of Hot Mix Asphalt vs Warm Mix Asphalt by ITS, Fatigue tests”, Proceedings, 9th International Conference on Latest Trends in Engineering and Technology (ICLTET'2016) Oct. 13-14, Abu Dhabi (UAE). DOI: 10.15242/iie. e1016. https://doi.org/10.15242/IIE.E1016009. (accessed 2. 11. 2018.).
[15] Cucalon L., Kassem E., Little D. & Masad E. (2016) “Fundamental evaluation of moisture damage in warm-mix asphalts”, Road Materials and Pavement Design, DOI: 10.1080/14680629.2016.1266765. https://doi.org/10.1080/14680629.2016.1266765. (accessed 1. 10. 2018.).
[16] Du J. (2017) “Laboratory Evaluation of Warm Asphalt Emulsion Mixture”, 5th International Conference on Innovation in Environment, Civil, Materials and Architecture Engineering (IECMAE-17) Aug. 8-9, Singapore. DOI: 10.17758/eirai. f0817301. https://doi.org/10.17758/EIRAI.F0817301. (accessed 2. 12. 2018.).
[17] Yin F., Martin A., Arámbula-Mercado E. (2016) “Warm-Mix Asphalt Moisture Susceptibility Evaluation for Mix Design and Quality Assurance”, Transportation Research Record: Journal of the Transportation Research Board. No. 2575, Transportation Research Board, Washington, pp 39–47. DOI: 10.3141/2575-05.
[18] Kumar S., and Suresha S. (2018) “Evaluation of Workability and Mechanical Properties of Non-foaming Warm Mix Asphalt Mixtures”, Advances in Civil Engineering Materials, 7 (1), pp 132-157, DOI: 10.1520/acem20170060. https://doi.org/10.1520/ACEM20170060. (accessed 2. 8. 2018.).
[19] Sebaaly P., Hajj E. and Piratheepan M. (2015) “Evaluation of Selected Warm Mix Asphalt Technologies”, Road Materials and Pavement Design, April vol. 16, pp. 475-486, DOI: 10.1080/14680629.2015.1030825.
[20] Kamarudin S., Hainin M., Satar M. and Warid M. (2018) “Comparison of Performance between Hot and Warm Mix Asphalt as Related to Compaction Design”, Journal of Physics: Conference Series, (July 2018), DOI: 10.1088/1742-6596/1049/1/012036.
[21] Bhargava N., Das B. and Siddagangaiah A., (2018) “Synergistic Influence of Aging and Moisture on Performance of Warm Mix.", International Journal of Pavement Research and Technology, June DOI: 10.1016/j.ijprt.2018.06.002.
[22] Bower N., Wen H., Wu S., Willoughby K., Weston J. and DeVol J., (2015) “Evaluation of The Performance of Warm Mix Asphalt in Washington State”, International Journal of Pavement Engineering, January, 17 (5), pp. 423-434. DOI: 10.1080/10298436.2014.993199. http://www.tandfonline.com/loi/gpav20. (accessed 2. 10. 2018.).
[23] SCRB. (2003) “General Specification for Roads and Bridges.” Section R/9, Hot-Mix Asphalt Concrete Pavement, Revised Edition. State Corporation of Roads and Bridges, Ministry of Housing and Construction, Republic of Iraq.
[24] ASTM. (2015) “Road and Paving Materials Vehicle Pavement Systems.” Annual Book of ASTM Standards, Vol. 04.03, American Society for Testing and Materials.
[25] AASHTO. (2013) “Standard Specification for Transportation Materials and Methods of Sampling and Testing”, American Association of State Highway and Transportation Officials, 14th Edition, Part II, Washington, D. C.
[26] Sarsam S. I. and Husain H. K, (2017) “Monitoring the Deformation of Asphalt Concrete under Repeated Tensile and Shear Stresses through Micro Cracks Healing Cycles” Proceedings, International Conference on Highway Pavements and Airfield Technology, American Society of Civil Engineers, Philadelphia, August, USA. DOI: 10.1061/9780784480939.004.
600 ATLANTIC AVE, BOSTON,
MA 02210, USA
+001-6179630233
AIS is an academia-oriented and non-commercial institute aiming at providing users with a way to quickly and easily get the academic and scientific information.
Copyright © 2014 - American Institute of Science except certain content provided by third parties.