International Journal of Energy Science and Engineering
Articles Information
International Journal of Energy Science and Engineering, Vol.1, No.3, Jul. 2015, Pub. Date: Jun. 13, 2015
Analysis of Direct Torque Controlled Induction Motor Drive System for Better Dynamic Response
Pages: 91-99 Views: 2618 Downloads: 1326
Authors
[01] Vivek Pahwa, Electrical & Electronics Engineering, Haryana College of Technology & Management, Kurukshetra University, Kaithal, India.
[02] Naveen Sharma, Pursuing M. Tech in Electrical & Electronics Engineering, Haryana College of Technology & Management, Kurukshetra University, Kaithal, India.
Abstract
This work implements a direct torque control with space vector modulation scheme on a 200hp induction motor using MATLAB/SIMULINK environment for better dynamic response. The scheme is implemented with voltage source inverter. Further, the scheme uses stator flux based calculator and depend only on stator resistance and on no other parameters. Thus, making it a simple scheme, as computational steps and dependence on many machine parameters will be reduced. Further, the result of direct - torque – control scheme have been compared with field - oriented control scheme on the same induction motor, and showing that the results of direct- torque-control are superior / better than field- oriented control. The work embodied in this paper established that direct torque control is better control scheme for induction motor drive system.
Keywords
Induction Machine Drive System, Direct Torque Control, Voltage Source Inverter, Space Vector Modulation, Stator Flux Based Calculator, Field-Oriented Control Scheme
References
[01] Y. V. Niranjan Kumar1, P. Hima Bindu, A. Divya Sneha, A. Sravani, “ A Novel Implementation of Phase Control Technique for Speed Control of Induction Motor Using ARDUINO” International Journal of Emerging Technology and Advanced Engineering, Vol. 3, pp. 469-473,Issue 4, April 2013.
[02] Amer BELLIL, Abdelkader Meroufel, “VSI PWM inverter feed induction machine using Volts per Hertz Control Scheme”, PRZEGLĄD ELEKTROTECHNICZNY (Electrical Review), pp. 128-131, 2012.
[03] H. M. Karkar, Dr. S. N. Pandya, “V/F method for induction motor drive speed control using mat-lab simulation”, Journal of information, knowledge and research in electrical engineering, vol. 2,issue – 02, pp. 192-197, Oct.2013.
[04] Tiejun Wang, Fang Fang, Xusheng Wu, and Xiaoyi Jiang, “Novel Filter for Stator Harmonic Currents Reduction in Six-Step Converter Fed Multiphase Induction Motor Drives,” IEEE Transactions on Power Electronics, VOL. 28, NO. 1, JANUARY 2013.
[05] Sujit K. Biswas, B. S. Ramakrishna Iyengar, and Joseph Vithayathil, “A New PWM Control Method for Three-Phase Auto-sequentially Commutated Current Source Inverters” IEEE Transactions On Industry Applications, vol. ia-23. no. 3, May/June 1987.
[06] Abdul Rahiman Beig, Saikrishna Kanukollu, “Space-Vector-Based Synchronized Three-Level Discontinuous PWM for Medium-Voltage High-Power VSI”, IEEE Transactions On Industrial Electronics, vol. 61, no. 8, August 2014.
[07] Luigi Alberti, Nicola Bianchi, and Silverio Bolognani, “Variable-Speed Induction Machine Performance Computed Using Finite-Element”. IEEE Transactions On Industry Applications, Vol. 47, No. 2, March/April 2011,
[08] Teresa Orlowska-Kowalska, and Mateusz Dybkowski, “Stator-Current-Based MRAS Estimator for a Wide Range Speed-Sensor-less Induction-Motor Drive”, IEEE Transactions On Industrial Electronics, Vol. 57, No. 4, April 2010.
[09] Hebertt Sira- Ramírez, Felipe González- Montañez, John Alexander Cortés-Romero, and Alberto Luviano-Juárez, “A Robust Linear Field-Oriented Voltage Control for the Induction Motor: Experimental Results, “IEEE Transactions On Industrial Electronics, Vol. 60, No. 8, August 2013.
[10] Reduction, Jef Beerten, Jan Verveckken, Student Member, IEEE, and Johan Driesen, Member, IEEE IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, VOL. 57, NO. 1, Predictive Direct Torque Control for Flux and Torque Ripple, JANUARY 2010,
[11] Tole Sutikno, Nik Rumzi Nik Idris, Auzani Jidin, , and Marcian N. Cirstea, “An Improved FPGA Implementation of Direct Torque Control for Induction Machines”, IEEE Transactions On Industrial Informatics, Vol. 9, No. 3, August 2013.
[12] Auzani Jidin, Nik Rumzi Nik Idris, Abdul Halim Mohamed Yatim, Tole Sutikno, and Malik E. Elbuluk, “An Optimized Switching Strategy for Quick Dynamic Torque Control in DTC-Hysteresis-Based Induction Machines”, IEEE Transactions on Industrial Electronics, Vol. 58, No. 8, August 2011.
[13] R. Krishnan, “Electric Motor Drives, Modeling, Analysis, and Control” PHI Publication, Edition 2012.
[14] Nur Hakimah Ab Aziz, Azhan Ab Rahman, “Simulation on Simulink AC4 Model (200hp DTC Induction Motor Drive) using Fuzzy Logic Controller”, International Conference on Computer Applications and Industrial Electronics (ICCAIE 2010), pp.553-557, Kuala Lumpur, Malaysia, December 2010.
[15] K. S. Sandhu and Vivek Pahwa, “A Novel Approach to Incorporate the Main Flux Saturation Effect in a Three-phase Induction Machine during Motoring and Plugging” International Journal of Computer and Electrical Engineering, Vol. 3, No. 3, June 2011.
600 ATLANTIC AVE, BOSTON,
MA 02210, USA
+001-6179630233
AIS is an academia-oriented and non-commercial institute aiming at providing users with a way to quickly and easily get the academic and scientific information.
Copyright © 2014 - American Institute of Science except certain content provided by third parties.