International Journal of Materials Chemistry and Physics
Articles Information
International Journal of Materials Chemistry and Physics, Vol.1, No.3, Dec. 2015, Pub. Date: Nov. 5, 2015
Modeling of Heat Transfer for Calculation Temperature Profile in Drilling Process
Pages: 330-332 Views: 2389 Downloads: 1238
[01] Ehsan Ghaedi, Department of Petroleum Engineering, Marvdasht Branch, Islamic Azad University, Marvdasht, Iran.
[02] Mohammad Gholamhossein Pour, Department of Petroleum Engineering, Marvdasht Branch, Islamic Azad University, Marvdasht, Iran.
Drilling speed and drilling efficiency is studied by using the unsteady model of dynamic 1-D. The damage in the vapor and liquid leaving time is studied due to the material interaction of laser. The Interface places of liquid – solid and vapour are obtained by solving the formulas and energy conservation equations in the relations. The dependence of saturation temperature to the mutual pressure for the use of the Clausius–Clapeyron equation is considered. Transitive heat loss of solid is in this model and is solved by using an approximate total method. The results indicate that the fraction of heat which from the transfer through the solid is very small and its impact on evaporation is not important. In other words, the transitive heat loss greatly reduces the thickness of the liquid layer, which after drilling, a new layer is recast.
Drilling, Heating Process, Laser, Heat Transfer, Liquid Layer, Solid
[01] Y. Zhang, A. Faghri, (1998), Vaporization, melting and heat conduction in the laser drilling. Inter. j. Heat & Mass Trans., 42, pp. 1775-1790.
[02] M. N. Mohamad Ibrahim, S. B. Chuah and P. Y. Chang. (2003) Tin-Tannin-Lignosulphate Complex: An Improved Lignosulphate-Based Drilling Fluid Thinner, J. Technolog. 38, pp 25-32.
[03] N. A. Andreas, C. Nicholas and G. Georgios, (2009). Shear Rejuvenation, Aging and Shear Banding in Yield Stress Fluids, J. Non-Newtonian Fluid Mechanics, 158, pp 6-17.
[04] E. A. Osman, and M. A. Aggour, (2003). Determination of Drilling Mud Density Change with Pressure and Temperature Made Simple and Accurate by ANN, Paper SPE 81422, Presented at the 2003 SPE Middle East Oil Show and Conference, Bahrain, 5 - 8 April.
[05] S. Nagesh, H. N. Narasimha Murthy, M. Krishna, H. Basavaraj, (2013). Parametric study of CO2 laser drilling f carbon nanopowder/vinylester/glass nanocomposites using design of experiments and grey relational analysis, Optics & Laser Technology, 48, pp 480-488.
[06] S. Mishra, V. Yadava, (2013). Modeling and optimization of laser beam percussion drilling of nickel-based superalloy sheet using Nd: YAG laser, Optics and Lasers in Engineering, 51, pp. 681-695
[07] Y. Zhang, Sh. Li, G. Chen, J. Mazumder, (2013). Experimental observation and simulation of keyhole dynamics during laser drilling, Optics & Laser Technology, 48, pp. 405-414.
[08] S. Mishra, V. Yadava, (2013). Modeling and optimization of laser beam percussion drilling of thin aluminum sheet, Optics & Laser Technology, 48, pp. 461-474.
[09] I. Arrizubieta, A. Lamikiz, S. Martínez, E. Ukar, I. Tabernero, F. Girot, (2013). Internal characterization and hole formation mechanism in the laser percussion drilling process, International Journal of Machine Tools and Manufacture, 75, pp. 55-62.
[10] L. Romoli, C. A. A. Rashed, G. Lovicu, G. Dini, F. Tantussi, F. Fuso, M. Fiaschi, (2014). Ultra short pulsed laser drilling and surface structuring of micro holes in stainless steels, CIRP Annals - Manufacturing Technology, 63, pp. 229-232.
[11] A. Bharatish, H. N. Narasimha Murthy, B. Anand, C. D. Madhusoodana, G.S. Praveena, M. Krishna, (2013). Characterization of hole circularity and heat affected zone in pulsed CO2 laser drilling of alumina ceramics, Optics & Laser Technology, 53, pp. 22-32.
[12] Y. Zhang, Zh. Shen, X. Ni, (2014) Modeling and simulation on long pulse laser drilling processing, International Journal of Heat and Mass Transfer, 73, pp. 429-437.
MA 02210, USA
AIS is an academia-oriented and non-commercial institute aiming at providing users with a way to quickly and easily get the academic and scientific information.
Copyright © 2014 - American Institute of Science except certain content provided by third parties.