International Journal of Modern Physics and Applications
Articles Information
International Journal of Modern Physics and Applications, Vol.5, No.2, Jun. 2019, Pub. Date: Jun. 25, 2019
Design of Upper and Lower Material Manipulators
Pages: 38-49 Views: 1417 Downloads: 367
Authors
[01] Mohammad Faisal Ahmed, Department of Mechanical and Electronic Engineering, Huzhou Normal University, Zhejiang, China.
[02] Abdulla–Al–Mamun, School of Teacher Education, Huzhou Normal University, Zhejiang, China.
Abstract
This design is a pneumatic loading and unloading manipulator, through the relevant literature review and collation and market research, the design of the manipulator has four degrees of freedom, and the use of circular coordinates form of design. This kind of manipulator has the characteristics of wide application range and simple operation. Through the design and analysis of the pneumatic loop, the motion mode of the manipulator is determined, and the specific motion of each part is described. This paper mainly designs three main parts of the manipulator, which are finger, wrist and arm. The structure of each part is designed and the working structure of the whole manipulator is determined. The manipulator has two kinds of replaceable functions, which can grasp bar or other rules of fast material, and can also load and unload sheet material. The hand is designed as a replaceable structure, with a clamping and adsorption structure; the rotary cylinder of the wrist is designed; the forehead expansion and lifting mechanism of the arm and the rotating motion of the hydraulic buffer arm is connected by two cylinders and two throttle dampers. It’s buffers are introduced. The driving torque of each structure is calculated and the design and calculation of each cylinder are carried out.
Keywords
Loading, Unloading, Manipulator, Cylinder, Pneumatic Circuit, Wrist Design, Arm Design
References
[01] Cai Zixing. Development trend and development strategy of robotics [J]. robotics, 2001, (4): 158-162.
[02] Ma Guang, Shen Guiying. Present Situation and Development Trend of Industrial Robot [J]. Journal of Jilin Normal University of Engineering and Technology, 2009, 9 (09): 2-5.
[03] Sun Bing, Zhao Bin, Shi Yonghui. Development of [J]. manipulator for material handling machine, 2009 (2): 1-7.
[04] Gao Wei, Yang Zhongping, Zhao Rongfei, et al. Structural optimization design of manipulator arm [J]. Mechanical design and manufacture 2004, 6 (09): 29-31.
[05] Hirohiko Arai, Kazuo Tanie, and Susumu Tachi. Dynamic Control of a Manipulator with Passive Joints in Operational Space. IEEE Transactions on Robotics and Automation [M].
[06] Li Ming. Single arm rotary manipulator design [M]. manufacturing technology and machine tool 2005.
[07] Abhinandan Jain and Guillermo Roderguez. An Analysis of the Kinematics and Dynamics of Underactuated Manipulators. IEEE Transactions on Robotics and Automation [C].
[08] Hu Sheng song. Principles of automatic control [M]. Beijing: Science Press. 2001.
[09] Zhang Liping. Handbook of hydraulic and pneumatic technology quick search [M] Beijing: Chemical Industry Press, 2006.
[10] Li Zhe. Development of automatic loading and unloading manipulator for punching machine [J], research and design, 200119 (2): 22-26.
[11] Zhang Fuxue authoring. Robotics and its applications [M]. Beijing: Publishing House of electronics industry, 2000.
[12] Chen Kuisheng. Hydraulic and pneumatic transmission [M]. Wuhan: Wuhan University of Technology press, 2008.
[13] Zhang Xinhua. Principle and design of automatic feeding machine for punching machine [J]. forging technology, 2003 (5): 6.
[14] SMC (China) Limited. Modern practical pneumatic technology [M]. Beijing: Machinery Industry Press, 2003.
[15] Li Duli, Wu Hong En, Liu Zhihai. Kinematics analysis of conveying manipulator [J]. 2007, 17 (2): 29-31.
600 ATLANTIC AVE, BOSTON,
MA 02210, USA
+001-6179630233
AIS is an academia-oriented and non-commercial institute aiming at providing users with a way to quickly and easily get the academic and scientific information.
Copyright © 2014 - American Institute of Science except certain content provided by third parties.